Dell 9.7(0.0) manual Isis ipv6 metric, Syntaxisis ipv6 metric default-metriclevel-1 level-2

Usage Information

Related Commands

VersionDescription

8.3.19.0Introduced on the S4820T.

8.3.12.0Introduced on the S4810.

8.3.11.1Introduced on the Z9000.

Hello PDUs are “padded” only when both the global and interface padding options are ON. Turning either one OFF disables padding for the corresponding interface.

hello padding — turns ON or OFF padding for LAN and point-to-point hello PDUs.

isis ipv6 metric

Assign metric to an interface for use with IPv6 information.

Syntaxisis ipv6 metric default-metric[level-1 level-2]

Parameters

Defaults

Command Modes

Command History

To return to the default values, use the no ipv6 isis metric [default- metric] [level-1 level-2]command.

default-metric	Metric assigned to the link and used to calculate the cost
	from each other router via the links in the network to other
	destinations. You can configure this metric for Level 1 or
	Level 2 routing. The range is from 0 to 16777215. The default
	is 10.
level-1	(OPTIONAL) Enter the keywords level-1to configure the
	shortest path first (SPF) calculation for Level 1 (intra-area)
	routing. This value is the default.
level-2	(OPTIONAL) Enter the keywords level-2to configure the
	SPF calculation for Level 2 (inter-area) routing.

default-metric = 10; level-1 (if not otherwise specified)

INTERFACE

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

872 Intermediate System to Intermediate System (IS-IS)