Defaults

Command Modes

Command History

•For a Loopback interface, enter the keyword loopback then a number from 0 to 16383.

•For a port channel interface, enter the keywords port- channel then a number. The range is from 1 to 128.

•For a Null interface, enter the keyword null then the Null interface number.

•For a VLAN interface, enter the keyword vlan then a number from 1 to 4094.

Not configured.

CONFIGURATION

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0)

Introduced on the S6000–ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.5.1.0Added support for 4-port 40G line cards on ExaScale.

8.3.7.0Introduced on the S4810.

7.6.1.0Introduced on the S-Series.

7.5.1.0Introduced on the C-Series.

pre-6.2.1.0

Introduced on the E-Series.

radius-server deadtime

Configure a time interval during which non-responsive RADIUS servers to authentication requests are skipped.

Syntax

radius-server deadtime seconds

 

To disable this function or return to the default value, use the no radius-server

 

deadtime command.

Parameters

seconds

Enter a number of seconds during which non-responsive

 

 

 

RADIUS servers are skipped. The range is from 0 to

 

 

2147483647 seconds. The default is 0 seconds.

Defaults

0 seconds

 

1392

Security

Page 1392
Image 1392
Dell 9.7(0.0) manual Radius-server deadtime seconds, Deadtime command