ftp Enter the keyword ftp to follow it with the location of the
source file in this form: //userid:password@hostip/filepath,
or press Enter to launch a prompt sequence.
tftp Enter the keyword tftp to follow it with the location of the
source file in this form: //hostlocation/filepath, or press
Enter to launch a prompt sequence.
flash Enter the keyword flash to follow it with the location of the
source file in this form: //filepath, or press Enter to launch a
prompt sequence.
usbflash Enter the keyword flash to follow it with the location of the
source file in this form: //filepath, or press Enter to launch a
prompt sequence.
AEnter the keywordA to upgrade the bootflash partition A
BEnter the keyword B to upgrade the bootflash partition B.
Defaults none
Command
Modes
EXEC Privilege
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
9.0(0.0)
Added support for IPv6 for the file-url parameter.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000. Added support for the SSD on the
Z9000 only.
Version 8.3.7.0 Introduced on the S4810.
Version 7.7.1.0 Added support for TFTP and SCP.
Version 7.6.1.0 Introduced on the S-Series.
Usage
Information You must reload Dell Networking OS after executing this command.
Example Dell#upgrade boot ?
all Upgrade both boot flash image and selector image
bootflash-image Upgrade boot flash image
bootselector-image Upgrade boot selector image
Dell#
File Management 87