Defaults

Command Modes

Command History

Usage Information

level-2

(OPTIONAL) Independently configures the interval of time

 

between transmission of CSNPs for Level 2.

seconds = 10; level-1 (if not otherwise specified)

INTERFACE

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0)

Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.12.0Introduced on the S4810.

8.3.11.1Introduced on the Z9000.

The default values of this command are typically satisfactory transmission times for a specific interface on a designated intermediate system. To maintain database synchronization, the designated routers send CSNPs.

You can configure Level 1 and Level 2 CSNP intervals independently.

isis hello-interval

Specify the length of time between hello packets sent.

Syntax

isis hello-interval seconds [level-1 level-2]

 

To return to the default values, use the no isis hello-interval [seconds]

 

[level-1 level-2] command.

Parameters

Allows you to set the length of time between hello packet

seconds

 

transmissions. The range is from 1 to 65535. The default is

 

10.

level-1

(OPTIONAL) Select this value to configure the hello interval

 

for Level 1. This value is the default.

level-2

(OPTIONAL) Select this value to configure the hello interval

 

for Level 2.

Intermediate System to Intermediate System (IS-IS)

869

Page 869
Image 869
Dell 9.7(0.0) manual Isis hello-interval seconds level-1 level-2