Dell 9.7(0.0) manual Bgp always-compare-med, Both, Path-count

Defaults

Command Modes

Command History

Related Commands

receive	Enter the keyword receive to indicate that the system
	accepts multiple paths from peers.
both	Enter the keyword both to indicate that the system sends
	and accepts multiple paths from peers.
path-count	Enter the number paths supported. The range is from 2 to
	64.
Disabled

•ROUTER BGP

•ROUTER BGP-address-family

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000–ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.0Introduced on the Z9000.

8.3.8.0Introduced on the S4810.

neighbor add-path — specifies that this neighbor/peer group can send/receive multiple path advertisements.

bgp always-compare-med

Allows you to enable comparison of the MULTI_EXIT_DISC (MED) attributes in the paths from different external ASs.

S6000

Syntax	bgp always-compare-med
	To disable comparison of MED, enter no bgp always-compare-med.
Defaults	Disabled (that is, the software only compares MEDs from neighbors within the
	same AS).
Command	ROUTER BGP
Modes
Command	This guide is platform-specific. For command information about other platforms,
History	refer to the relevant Dell Networking OS Command Line Reference Guide.
	The following is a list of the Dell Networking OS version history for this command.

340 Border Gateway Protocol