Dell 9.7(0.0) manual Logging console level

		informational, or debugging. The default is 7 or
		debugging.
	size	(OPTIONAL) Indicate the size, in bytes, of the logging buffer.
		The number of messages buffered depends on the size of
		each message. The range is from 40960 to 524288. The
		default is 40960 bytes.
Defaults	level = 7; size = 40960 bytes
Command	CONFIGURATION
Modes
Command	This guide is platform-specific. For command information about other platforms,
History	refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Usage Information

Related Commands

Version	Description
9.7(0.0)	Introduced on the S6000-ON.
9.2(0.0)	Introduced on the M I/O Aggregator. This command is
	supported in Programmable-Mux (PMUX) mode only.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

7.6.1.0Introduced on the S-Series.

7.5.1.0Introduced on the C-Series.

E-Series legacy command

When you decrease the buffer size, all messages stored in the buffer are lost. Increasing the buffer size does not affect messages stored in the buffer.

clear logging — clears the logging buffer.

default logging buffered — returns the logging buffered parameters to the default setting.

show logging — displays the logging setting and system messages in the internal buffer.

logging console

Specify which messages are logged to the console.

Syntax logging console [level]

Simple Network Management Protocol (SNMP) and Syslog 1507