Usage Information

Example

Version

Introduced on the S4820T.

8.3.19.0

 

Version 8.3.11.1

Introduced on the Z9000. Added support for the SSD on the

 

Z9000 only.

Version 8.3.7.0

Introduced on the S4810.

You must reload FTOS after executing this command. Use the command upgrade system stack-unit to copy FTOS from the management unit to one or more stack members.

Dell#upgrade system ?

flash: Copy from flash file system (flash://filepath)

ftp: Copy from remote file system, IPv4 or IPv6, (ftp:// userid:password@hostip/filepath)

scp: Copy from remote file system, IPv4 or IPv6, (scp:// userid:password@hostip/filepath)

stack-unit Sync image to the stack-unit

tftp: Copy from remote file system, IPv4 or IPv6, (tftp:// hostip/filepath)

usbflash: Copy from usbflash file system (usbflash://filepath) Dell#

upgrade boot

Upgrade the bootflash image or bootselector image.

S6000

Syntaxupgrade boot {all bootflash—image bootselector-image}stack- unit {0-5 all}{booted flash: ftp: scp: tftp: usbflash:} {A: B:}

Parameters

Enter the keyword all to change both the bootflash and

all

 

bootselector images.

bootflash-

Enter the keyword bootflash-imageto change the

image

bootflash image..

bootselector-

Enter the keyword bootselector-imageto upgrade the

image

BIOS system image.

0–5

Enter the keywords 0–5to upgrade only the mentioned

 

stack-unit .

all

Enter the keywords all to upgrade the member stack-units.

booted

Enter the keyword booted to upgrade from the current

 

image in the S6000.

86

File Management

Page 86
Image 86
Dell 9.7(0.0) manual Upgrade boot, Bootflash, Image, Bootselector, Booted