Dell 9.7(0.0) manual Spanning-tree msti, Cost cost

Parameters

Defaults

Command Modes

Command History

spanning-treeEnter the keywords spanning-treeto enable the MSTP on the interface.

Enable.

INTERFACE

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

7.6.1.0Introduced on the S-Series.

7.5.1.0Introduced on the C-Series.

pre-6.2.1.0 Introduced on the E-Series.

spanning-tree msti

Configure multiple spanning tree instance cost and priority for an interface.

S6000

Syntaxspanning-tree msti instance {cost cost priority priority}

Parameters

msti instance	Enter the keyword msti and the MST instance number. The
	range is from zero (0) to 63.
cost cost	(OPTIONAL) Enter the keyword cost then the port cost
	value. The range is from 1 to 200000. The defaults are:
	• 100 Mb/s Ethernet interface = 200000
	• 1-Gigabit Ethernet interface = 20000
	• 10-Gigabit Ethernet interface = 2000
	• Port Channel interface with one 100 Mb/s Ethernet =
	200000
	• Port Channel interface with one 1 Gigabit Ethernet =
	20000

Multiple Spanning Tree Protocol (MSTP) 1009