Dell 9.7(0.0) manual Show mac access-lists access-list-name interface interface, Out

Usage Information

Related Commands

Version	Description
9.7(0.0)	Introduced on the S6000–ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

8.1.1.0Introduced on the E-Series ExaScale.

7.8.1.0Increased the name string to accept up to 140 characters. Prior to 7.8.1.0, names are up to 16 characters long.

7.6.1.0Introduced on the S-Series.

7.5.1.0Introduced on the C-Series.

6.1.1.0Introduced on the E-Series.

You can assign one ACL (standard or extended) to an interface.

mac access-list standard — configures a standard MAC ACL.

mac access-list extended — configures an extended MAC ACL.

show mac access-lists

Display all of the Layer 2 ACLs configured in the system, whether or not they are applied to an interface, and the count of matches/mismatches against each ACL entry displayed.

Syntax	show mac access-lists [access-list-name] [interface interface]
	[in out]
Parameters	access-list-	Enter the name of a configured MAC ACL, up to 140
	name	characters.
	interface	Enter the keyword interface then the one of the following
	interface	keywords and slot/port or number information:
		• For a 10-Gigabit Ethernet interface, enter the keyword
		TenGigabitEthernet then the slot/port information.
		• For a 40-Gigabit Ethernet interface, enter the keyword
		fortyGigE then the slot/port information.
		• For a VLAN interface, enter the keyword vlan then a
		number from 1 to 4094.
	in out	Identify whether ACL is applied on ingress or egress side.
Command	EXEC Privilege
Modes

Access Control Lists (ACL) 223