Dell 9.7(0.0) manual Dot1x supplicant-timeout, Parameters Defaults Command Modes Command History

Parameters

Defaults

Command Modes

Command History

seconds	Enter a time-out value in seconds. The range is from 1 to
	300, where 300 is implementation dependant. The default is
	30.
30 seconds
INTERFACE

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000–ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

7.6.1.0Introduced on the C-Series and S-Series.

7.4.1.0Introduced on the E-Series.

dot1x supplicant-timeout

Configure the amount of time after which exchanges with the supplicant time-out.

Syntax	dot1x supplicant-timeout seconds
	To return to the default, use theno dot1x supplicant-timeoutcommand.
Parameters	seconds	Enter a time-out value in seconds. The range is from 1 to
		300, where 300 is implementation dependant. The default is
		30.
Defaults	30 seconds
Command	INTERFACE
Modes
Command	This guide is platform-specific. For command information about other platforms,
History	refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Security 1417