Dell 9.7(0.0) Show ip bgp cluster-list, Show ip bgp vrf vrf-name ipv4 multicast unicast ipv6

Example

Related Commands

The show ip bgp command displays the dmzlink-dw details only if dmzlink-bw is enabled using the bgp dmzlink-dwcommand.

Dell#show ip bgp

BGP local RIB : Routes to be Added 0, Replaced 0, Withdrawn 0 BGP local router ID is 192.168.11.5

Status codes: s suppressed, S stale, d dampened, h history, * valid, > best

Path source: I - internal, a - aggregate, c - confed-external,

r - redistributed			S - stale
	n - network, D - denied,
Origin codes: i - IGP, e - EGP, ? - incomplete
	Network	Next Hop	Metric		LocPrf
Weight Path
*>	55.0.0.0/24		0 200	i
172.16.0.2
*>	66.0.0.0/24		0 200	i
172.16.0.2

All the show and debugs commands display the link band width extended- community prefixed with DMZ-Link-bw along with other extended communities.

Dell#show ip bgp 3.3.3.0/24

BGP routing table entry for 3.3.3.0/24

Paths: (1 available, table Default-IP-Routing-Table.) Not advertised to any peer

Received from :

1.1.1.2 (3.3.3.1) Best AS_PATH :

Next-Hop : 1.1.1.2, Cost : 0

Origin IGP, Metric 0, LocalPref 100, Weight 0, internal Extended Communities :

DMZ-Link Bw: 2000 kbytes*

show ip bgp community — views the BGP communities.

neighbor maximum-prefix — controls the number of network prefixes received.

show ip bgp cluster-list

View BGP neighbors in a specific cluster.

S6000

Syntax	show ip bgp [vrf vrf-name] [ipv4 {multicast unicast} ipv6
	unicast] cluster-list[cluster-id]
Parameters	vrf vrf-name	(OPTIONAL) Enter the keyword vrf and then the name of
		the VRF to view cluster information of BGP neighbors
		corresponding to that VRF.
	ipv4 multicast	(OPTIONAL) Enter the keywords ipv4 followed by the
		keyword multicast to view information related only to ipv4
		multicast routes.

418 Border Gateway Protocol