Dell 9.7(0.0) manual Storm-control unknown-unicast Configuration

Command Modes

Command History

INTERFACE (conf-if-interface-slot/port)

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

7.6.1.0Introduced on the C-series and S-Series.

storm-control unknown-unicast (Configuration)

Configure the percentage of unknown-unicast traffic allowed in or out of the network.

Syntaxstorm-control unknown-unicast [packets_per_second in]

Parameters

Defaults

Command Modes

Command History

To disable storm control for unknown-unicast traffic, use the no storm-controlunknown-unicast [packets_per_second in] command.

packets_per_se	Enter the packets per second of broadcast traffic allowed
cond in	into the network. The range is from 0 to 33554368.
none
CONFIGURATION

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

1548 Storm Control