Dell 9.7(0.0) manual Neighbor soft-reconfiguration inbound, Format

Defaults

Command Modes

Command History

Usage Information

Related Commands

Enabled (that is, BGP neighbors and peer groups are disabled.)

ROUTER BGP

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000–ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

7.8.1.0Introduced on the S-Series.

7.7.1.0Introduced on the C-Series.

Peers that are enabled within a peer group are disabled when their peer group is disabled.

The neighbor shutdown command terminates all BGP sessions on the BGP neighbor or BGP peer group. Use this command with caution as it terminates the specified BGP sessions. When a neighbor or peer group is shut down, use the show ip bgp summary command to confirm its status.

show ip bgp summary — displays the current BGP configuration.

show ip bgp neighbors — displays the current BGP neighbors.

neighbor soft-reconfiguration inbound

Enable soft-reconfiguration for BGP.

S6000

Syntaxneighbor {ip-address peer-group-name} soft-reconfiguration inbound

To disable, use the no neighbor {ip-address peer-group-name} soft- reconfiguration inbound command.

Parameters	Enter the IP address of the neighbor in dotted decimal
ip-address
	format.

402 Border Gateway Protocol