Dell 9.7(0.0) - page 1227

trunk Enter the keyword trunk to configure the selected port or

port channel as a trunk port in a PVLAN.

Defaults Disabled.

Command

Modes

INTERFACE

Command

History This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.8.1.0 Introduced on the C-Series and S-Series.

Usage

Information The assignment of the various PVLAN port types to port and port channel (LAG)

interfaces is shown in the following example.

Example Dell#conf

Dell(conf)#interface TenGigabitEthernet 2/1

Dell(conf-if-te-2/1)#switchport mode private-vlan promiscuous

Dell(conf)#interface TenGigabitEthernet 2/2

Dell(conf-if-te-2/2)#switchport mode private-vlan host

Dell(conf)#interface TenGigabitEthernet 2/3

Dell(conf-if-te-2/3)#switchport mode private-vlan trunk

Dell(conf)#interface port-channel 10

Dell(conf-if-te-2/3)#switchport mode private-vlan promiscuous

Commands private-vlan mode — sets the mode of the selected VLAN to community, isolated,

or primary.

private-vlan mapping secondary-vlan — sets the mode of the selected VLAN to

primary and then associates the secondary VLANs to it.

Private VLAN (PVLAN) 1227