Dell 9.7(0.0) manual Debug isis snp-packets, Syntaxdebug isis vrf vrf-name snp-packets interface

Command Modes

Command History

interface	(OPTIONAL) Identifies the interface type slot/port as one of
	the following:
	• For a 10-Gigabit Ethernet interface, enter the keyword
	TenGigabitEthernet then the slot/port information.
	• For a 40-Gigabit Ethernet interface, enter the keyword
	fortyGigE then the slot/port information.
	• For a port channel interface, enter the keywords port-
	channel then a number.
	• For a VLAN interface, enter the keyword vlan then a
	number from 1 to 4094.
EXEC Privilege

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version	Description
9.7(0.0)	Added support for VRF. Introduced on the S6000-ON.
9.2(0.2)	Introduced on the Z9000.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.12.0Introduced on the S4810.

6.3.1.0Introduced.

debug isis snp-packets

To debug IS-IS complete sequence number PDU (CSNP) and partial sequence number PDU (PSNP) packets, enable debugging on a specific interface and provides diagnostic information.

S6000

Syntaxdebug isis [vrf vrf-name] snp-packets [interface]

To turn off debugging, use the no debug isis [vrf vrf-name] snp- packets [interface] command.

Parameters	(Optional) Enter the keyword vrf followed by the name of the
vrf vrf-name
	VRF to enable debugging information on ISIS for CSNP/PSNP
	packets tied to that VRF. The command displays the SNP
	(CSNP/PSNP) related debugging information.

848 Intermediate System to Intermediate System (IS-IS)