Dell 9.7(0.0) manual Command Modes Command History Longer-prefixes, List prefix-list, Routing-tag

Command Modes

Command History

longer-prefixes	(OPTIONAL) Enter the keywords longer-prefixesto view
	all routes with a common prefix.
list prefix-list	(OPTIONAL) Enter the keyword list and the name of a
	configured prefix list. For more information, refer to the
	show ip route list command.
protocol	(OPTIONAL) Enter the name of a routing protocol (bgp,
	isis, ospf, rip) or the keywords connected or static.
	NOTE: bgp, isis, ospf, and rip.
	• If you enter bgp, you can include the BGP as-number .
	• If you enter isis, you can include the ISIS routing-
	tag.
	• If you enter ospf, you can include the OSPF process-
	id.
process-id	(OPTIONAL) Specify that only OSPF routes with a certain
	process ID must be displayed.
routing-tag	(OPTIONAL) Specify that only ISIS routes with a certain
	routing tag must be displayed.
connected	(OPTIONAL) Enter the keyword connected to view only the
	directly connected routes.
all	(OPTIONAL) Enter the keyword all to view both active and
	non-active routes.
static	(OPTIONAL) Enter the keyword static to view only routes
	the ip route command configures.
summary	(OPTIONAL) Enter the keyword summary. For more
	information, refer to the show ip route summary command.

•EXEC

•EXEC Privilege

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version	Description
9.7(0.0)	Introduced on the S6000-ON.
9.4.(0.0)	Added support for VRF.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

IPv4 Routing 805