Dell 9.7(0.0) manual Clear counters ip access-group, Ip access-group, Characters

clear counters ip access-group

Erase all counters maintained for access lists.

Syntaxclear counters ip access-group [access-list-name]

Parameters	(OPTIONAL) Enter the name of a configured access-list, up
access-list-
name	to 140 characters.

Command Modes

Command History

EXEC Privilege

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version	Description
9.7(0.0)	Introduced on the S6000–ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

8.1.1.0Introduced on the E-Series ExaScale.

7.8.1.0Increase the name string to accept up to 140 characters. Prior to 7.8.1.0, names were up to 16 characters long.

7.6.1.0Introduced on the S-Series.

7.5.1.0Introduced on the C-Series.

6.2.1.1Introduced on the E-Series.

ip access-group

Assign an IP access list (IP ACL) to an interface.

Syntaxip access-group access-list-name{in out} [implicit-permit]

[vlan vlan-id] [vrf vrf-name]

To delete an IP access-group configuration, use the no ip access-group

access-list-name{in out} [implicit-permit] [vlan vlan-id]

[vrf vrf-name]command.

Parameters	Enter the name of a configured access list, up to 140
access-list-
name	characters.
in	Enter the keyword in to apply the ACL to incoming traffic.

186 Access Control Lists (ACL)