Link local address IPv6 address of interface
IPSecv6 policy name Name of the IPsec security policy applied to the
interface.
inbound/outbound ah Authentication policy applied to inbound or
outbound traffic.
inbound/outbound esp Encryption policy applied to inbound or outbound
traffic.
spi Security policy index number used to identify the
policy.
transform Security algorithm that is used to provide
authentication, integrity, and confidentiality.
in use settings Transform that the SA uses (only transport mode is
supported).
replay detection support Y: An SA has enabled the replay detection feature.
N: The replay detection feature is not enabled.
STATUS ACTIVE: The authentication or encryption policy is
enabled on the interface.
show ipv6 ospf database
Display information in the OSPFv3 database, including link-state advertisements (LSAs).
S6000
Syntax show ipv6 ospf [process-number] [vrf vrf-name] database
[database-summary | grace-lsa]
Parameters process-
number
Enter the OSPF process number.
vrf vrf-name (Optional) Enter the keyword vrf followed by the name of the
VRF to display neighbors corresponding to that VRF.
NOTE: If you do not specify this option, neighbors
corresponding to the default VRF are displayed.
database-
summary (OPTIONAL) Enter the keywords database-summary to
view a summary of database LSA information.
grace-lsa (OPTIONAL): Enter the keywords grace-lsa to display the
Type-11 Grace LSAs sent and received on an OSPFv3 router.
Defaults none
Open Shortest Path First (OSPFv2 and OSPFv3) 1171