Dell 9.7(0.0) manual Msti instance, Vlan range, Bridge-priority, Priority

Related Commands

VersionDescription

8.3.7.0Introduced on the S4810.

7.6.1.0Introduced on the S-Series.

7.5.1.0Introduced on the C-Series.

6.5.1.0Introduced.

forward-delay — the amount of time the interface waits in the Blocking State and the Learning State before transitioning to the Forwarding State.

hello-time — changes the time interval between BPDUs.

msti

Configure multiple spanning tree instance, bridge priority, and one or multiple VLANs mapped to the MST instance.

S6000

Syntaxmsti instance {vlan range bridge-priority priority}

Parameters

Defaults

Command Modes

Command History

To disable mapping or bridge priority, use the no msti instance {vlan range bridge-prioritypriority} command.

msti instance	Enter the MSTP instance. The range is from zero (0) to 63.
vlan range	Enter the keyword vlan then the identifier range value. The
	range is from 1 to 4094.
bridge-priority	Enter the keywords bridge-prioritythen a value in
priority	increments of 4096 as the bridge priority. The range is from
	zero (0) to 61440.
	Valid priority values are: 0, 4096, 8192, 12288, 16384, 20480,
	24576, 28672, 32768, 36864, 40960, 45056, 49152, 53248,
	57344, and 61440. All other values are rejected.

default bridge-priority is 32768.

INTERFACE

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

1000 Multiple Spanning Tree Protocol (MSTP)