Dell 9.7(0.0) manual Show ip ospf database opaque-area, Command History Related Commands

Command History

Related Commands

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version	Description
9.7(0.0)	Introduced on the S6000-ON.
9.4.(0.0)	Added support for VRF.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

7.8.1.0Added support for Multi-Process OSPF.

7.6.1.0Introduced on the S-Series.

7.5.1.0Introduced on the C-Series.

pre-6.1.1.1 Introduced on the E-Series.

show ip ospf database — displays OSPF database information.

show ip ospf database opaque-area

Display the opaque-area (type 10) LSA information.

S6000

Syntaxshow ip ospf [process-id vrf vrf-name] database opaque-area

[link-state-id][adv-routerip-address]

Parameters	Enter the OSPF Process ID to show a specific process. If no
process-id
	Process ID is entered, command applies only to the first
	OSPF process.
vrf vrf-name	Enter the keyword vrf followed by the name of the VRF to
	view opaque-area LSA information corresponding to the
	OSPF process that is tied to a specific VRF.
link-state-id	(OPTIONAL) Specify LSA ID in dotted decimal format. The
	LSA ID value depends on the LSA type, and it can be one of
	the following:
	• the network’s IP address for Type 3 LSAs or Type 5 LSAs
	• the router’s OSPF router ID for Type 1 LSAs or Type 4
	LSAs
	• the default destination (0.0.0.0) for Type 5 LSAs

Open Shortest Path First (OSPFv2 and OSPFv3) 1117