Dell 9.7(0.0) manual Snmp-server view, Syntaxsnmp-server view view-nameoid-treeincluded excluded

Defaults

Command Modes

Command History

priv-password(OPTIONAL) Enter a text string (up to 20 characters long) password that enables the host to encrypt the contents of the message it sends to the agent and to decrypt the contents of the message it receives from the agent. Minimum: eight characters long.

If no authentication or privacy option is configured, then the messages are exchanged (attempted anyway) without any authentication or encryption.

CONFIGURATION

Version	Description
9.7(0.0)	Introduced on the S6000-ON.
9.3(0.0)	Added support for the AES128-CFB encryption algorithm on
	the S4820T, S4810, S6000 and Z-Series platforms

Usage Information

Example

To enable robust, effective protection and security for SNMP packets transferred between the server and the client, you can use the snmp-server user

username group groupname 3 auth authentication-type auth- password priv aes128 priv-passwordto specify that AES128-CFB encryption algorithm needs to be used.

You cannot modify the FIPS mode if SNMPv3 users are already configured and present in the system. An error message is displayed if you attempt to change the FIPS mode by using the fips mode enable command in Global Configuration mode. You can enable or disable FIPS mode only if SNMPv3 users are not previously set up. Otherwise, you must remove the previously configured users before you change the FIPS mode.

Dell# snmp-server user privuser v3group v3 encrypted auth md5 9fc53d9d908118b2804fe80e3ba8763d priv aes128 d0452401a8c3ce42804fe80e3ba8763d

Related	show snmp user — Displays the information configured on each SNMP user name.
Commands

snmp-server view

Configure an SNMPv3 view.

Syntaxsnmp-server view view-nameoid-tree{included excluded}

To remove an SNMPv3 view, use the no snmp-server view view-name oid- tree {included excluded} command.

Parameters	Enter the name of the view (not to exceed 20 characters).
view-name
oid-tree	Enter the OID sub tree for the view (not to exceed 20
	characters).

1498 Simple Network Management Protocol (SNMP) and Syslog