28
Layer 2
This chapter describes commands to configure Layer 2 features.
This chapter contains the following sections:
•MAC Addressing Commands
•Virtual LAN (VLAN) Commands
•Far-End Failure Detection (FEFD)
The VLAN commands are supported on all the S6000 platform.

MAC Addressing Commands

The following commands are related to configuring, managing, and viewing MAC addresses.

mac-address-table aging-time

Specify an aging time for MAC addresses to remove from the MAC address table.
S6000
Syntax mac-address-table aging-time seconds
Parameters seconds Enter either zero (0) or a number as the number of seconds
before MAC addresses are relearned. To disable aging of the
MAC address table, enter 0. The range is from 10 to
1000000. The default is 1800 seconds.
Defaults 1800 seconds
Command
Modes
CONFIGURATION
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
918 Layer 2