Dell 9.7(0.0) manual Parameters Enter the policy map name, Unitnumber, Unit slot number

Usage Information

You can configure all the data queues. For S6000, you can configure queues 0-7.

The following table describes the mapping between the threshold weight of the shared buffer on the queue and the percentage of available shared buffer that is used by the queue for each of the corresponding threshold weights of the shared buffer:

shared-threshold-weight on the queue	% of available shared buffer that
	can be consumed by the queue.
0	No dynamic sharing; shared buffer
	= 0.
1	0.77%
2	1.54%
3	3.03%
4	5.88%
5	11.11%
6	20%
7	33.33%
8	50%
9	66.67%
10	80%
11	88.89%

Example	Dell(conf-if-te-1/8)#Service-class buffer shared-threshold-
	weight queue5 4 queue7 6

test cam-usage

Check the Input Policy Map configuration for the CAM usage.

S6000

Syntaxtest cam-usage service-policy input policy-mapstack-unit {[number port-set portpipe number] [all]}

Parameters	Enter the policy map name.
policy-map
stack-	(OPTIONAL) Enter the keyword stack-unitthen the stack-
unitnumber	unit slot number.

Quality of Service (QoS) 1283