Dell 9.7(0.0) manual Show monitor session session-ID

show monitor session

Display information about monitoring sessions.

Syntax show monitor session {session-ID}

Parameters

Defaults

Command Modes

Command History

Example

To display monitoring information for all sessions, use the show monitor session command.

session-ID	(OPTIONAL) Enter a session identification number. The range
	is from 0 to 65535.
none

•EXEC

•EXEC Privilege

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000-ON.

9.4.0.0Added support for the RPM / ERPM.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.7.0Introduced on the S4810.

8.3.11.1Introduced on the Z9000.

8.1.1.0Introduced on the E-Series ExaScale.

7.7.1.0Introduced on the S-Series.

7.5.1.0Introduced on the C-Series.

7.4.1.0Introduced on the E-Series.

Dell#show monitor session 1

SessID Source Destination Dir Mode Source IP Dest IP DSCP TTL

------ ------ ----------- --- ---- --------- -------- ------

-----

1 Te 1/2 remote-ip rx Port 0.0.0.0 0.0.0.0 0 0 Dell#show monitor session

SessID Source Destination Dir Mode Source IP Dest IP DSCP TTL

------ ------ ----------- --- ---- --------- -------- ------

----

1 Te 1/2 remote-ip rx Port 0.0.0.0 0.0.0.0 0 255 99 NONE NONE N/A N/A N/A N/A N/A N/A

1218 Port Monitoring