Dell 9.7(0.0) manual Enter the keyword summary to display just a summary

Defaults

Command Modes

Command History

Usage Information

Example

	• For a 40-Gigabit Ethernet interface, enter the keyword
	fortyGigE then the slot/port information.
	• For a port channel interface, enter the keywords port-
	channel then a number. The range is from 1 to 128.
summary	Enter the keyword summary to display just a summary of the
	GVRP statistics.
none

•EXEC

•EXEC Privilege

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000–ON.

9.0.2.0Introduced on the S6000.

8.3.11.1Introduced on the Z9000.

7.6.1.0Introduced on C-Series, E-Series, and S-Series

Invalid messages/attributes skipped can occur in the following cases:

•The incoming GVRP PDU has an incorrect length.

•"End of PDU" was reached before the complete attribute could be parsed.

•The Attribute Type of the attribute that was being parsed was not the GVRP VID Attribute Type (0x01).

•The attribute that was being parsed had an invalid attribute length.

•The attribute that was being parsed had an invalid GARP event.

•The attribute that was being parsed had an invalid VLAN ID. The valid range is from 1 to 4095.

A failed registration can occur for the following reasons:

•Join requests were received on a port that was blocked from learning dynamic VLANs (GVRP Blocking state).

•An entry for a new GVRP VLAN could not be created in the GVRP database.

Dell#show gvrp statistics int tengigabitethernet 1/1

Join Empty Received: 0

Join In Received: 0

Empty Received: 0

LeaveIn Received: 0

Leave Empty Received: 0

Leave All Received: 40

Join Empty Transmitted: 156

634 GARP VLAN Registration (GVRP)