Dell 9.7(0.0) manual Retrans-timer value

Parameters

Defaults

Command

Modes

Command

History

Related Commands

value	Enter the advertised reachability time in milliseconds. The
	range is from 0 to 3,600,000 milliseconds.

none

POLICY LIST CONFIGURATION

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version	Description
9.7(0.0)	Introduced on the S6000-ON.
9.7(0.0)	Introduced on the S4810, S4820T, S5000, S6000, and
	Z9000 switches.

•ipv6 nd ra-guard enable — Allows you to configure the RA guard related commands.

•ipv6 nd raguard policy policy-name — Defines the RA guard policy name and enter the RA guard policy configuration mode.

retrans-time

Enable the verification of the configured retransmission timer value in the received RA packets.

Syntax retrans—timer value

Parameters

Defaults

Command

Modes

Command

History

To reset the advertised retransmission interval, use the no retrans-timervaluecommand.

value	Enter the advertised retransmission time interval in
	milliseconds. The range is from 100 to 4,294,967,295
	milliseconds.

none

POLICY LIST CONFIGURATION

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version	Description
9.7(0.0)	Introduced on the S6000-ON.

1032 Neighbor Discovery Protocol (NDP)