Dell 9.7(0.0) manual Defaults Command Modes Command History Rising, Threshold value, Event-number

Defaults

Command Modes

Command History

rising-	Enter the keywords rising-thresholdthen the value (64
threshold value	bit) the rising-threshold alarm is either triggered or reset.
event-number	Then enter the event-number to trigger when the rising
	threshold exceeds its limit. This value is the same as the
	alarmRisingEventIndex or alarmTable of the RMON MIB. If
	there is no corresponding rising-threshold event, the value is
	zero.
falling-	Enter the keywords falling-thresholdthen the value (64
threshold value	bit) the falling-threshold alarm is either triggered or reset.
event-number	Then enter the event-number to trigger when the falling
	threshold exceeds its limit. This value is the same as the
	alarmFallingEventIndex or the alarmTable of the RMON MIB.
	If there is no corresponding falling-threshold event, the value
	is zero.
owner string	(OPTIONAL) Enter the keyword owner then the owner name
	to specify an owner for the alarm. This is the alarmOwner
	object in the alarmTable of the RMON MIB.
owner
CONFIGURATION

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

7.6.1.0Introduced on the S-Series.

7.5.1.0Introduced on the C-Series.

6.1.1.0Introduced on the E-Series.

Remote Monitoring (RMON) 1335