Dell 9.7(0.0) manual Service-policy input policy-map-name layer2

Usage Information

Related Commands

VersionDescription

8.3.7.0Introduced on the S4810.

On 40-port 10G stack-unit if the traffic is shaped between 64 and 1000 Kbs, for some values, the shaped rate is much less than the value configured.

rate shape — shapes traffic output as part of the designated policy.

qos-policy-output — creates a QoS output policy.

service-policy input

Apply an input policy map to the selected interface.

S6000

Syntax service-policy input policy-map-name[layer2]

Parameters

Defaults

Command Modes

Command History

Usage Information

To remove the input policy map from the interface, use the no service-policy input policy-map-name [layer2] command.

policy-map-	Enter the name for the policy map in character format (32
name	characters maximum). You can identify an existing policy
	map or name one that does not yet exist.
layer2	(OPTIONAL) Enter the keyword layer2 to specify a Layer 2
	Class Map. The default is Layer 3.
Layer 3
INTERFACE

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

You can attach a single policy-map to one or more interfaces to specify the service-policy for those interfaces. A policy map attached to an interface can be modified.

Quality of Service (QoS) 1271