Dell 9.7(0.0) manual Ip ssh server, Ciphers cipher, List

added to the list of authorized keys (ip ssh rsa-authentication my-

authorized-keys device://filename command).

ip ssh server

Configure an SSH server. SSH server is enabled by default.

S6000

Syntax

NOTE: Some of the parameters in this command require licensing to access. For more information, contact your Dell Networking representative.

ip ssh server {ciphers cipher-list} {enable port port-number} [kex key-exchange-algorithm] [mac hmac-algorithm] [version {1 2}]

To disable SSH server functions, use the no ip ssh server {ciphers cipher-list} {enable port port-number} [kex key-exchange- algorithm] [mac hmac-algorithm] [version {1 2}] command.

Parameters	Enter the key word enable to start the SSH server.
enable
ciphers cipher-	Enter the keyword ciphers and then a space-delimited list
list	of ciphers that the SSH server supports.
	The following ciphers are available.
	•	3des-cbc
	•	aes128-cbc
	•	aes192-cbc
	•	aes256-cbc
	•	aes128-ctr
	•	aes192-ctr
	•	aes256-ctr
	The default cipher list is used.
	•	3des-cbc
	•	aes128-cbc
	•	aes192-cbc
	•	aes256-cbc
	•	aes128-ctr
	•	aes192-ctr
	•	aes256-ctr

1432 Security