Dell 9.7(0.0) manual Qos dscp-color-policy, Dscp-color-policycolor-map-profile-name

Related Commands

qos dscp-color-map— associates the DSCP color map profile with an interface so that all IP packets received on it is given a color based on that color map

dscp— sets the number of specific DSCP values for color map profile to yellow or red.

qos dscp-color-policy

Associates the DSCP color map profile with an interface so that all IP packets received on it is given a color based on that color map.

Syntax

Parameters

Defaults

Command Modes

Command History

Usage Information

Example

Related Commands

dscp-color-policycolor-map-profile-name

To remove a color policy map profile, use the no dscp-color-policycolor- map-profile-namecommand.

color-map-	Enter the color map profile name. The name can have a
profile-name	maximum of 32 characters.

None

CONFIG-INTERFACE

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000-ON.

Version 9.5.0.0 Introduced on the Z9000, S6000, S4820T, S4810, and MXL.

If the specified color-map does not exist, the Diffserv Manager (DSM) creates a color map and sets all the DSCP values to green (low drop precedence).

The following example assigns the color map, bat-enclave-map, to interface te 1/11.

Dell(conf)# int te 1/11

Dell(conf-if-te-1/11)# qos dscp-color-policy bat-enclave-map

dscp— sets the number of specific DSCP values for color map profile to yellow or red.

qos dscp-color-map— configures the DSCP color map.

1298 Quality of Service (QoS)