Dell 9.7(0.0) manual Set level, Backbone, Level-1-2, Stub-area

set level

To specify the IS-IS level or OSPF area to which matched routes are redistributed, configure a filter.

Syntaxset level {backbone level-1 level-1-2 level-2 stub- area}

Parameters

Defaults

Command Modes

Command History

To remove a set level condition, use the no set level {backbone level-1 level-1-2 level-2 stub-area}command.

backbone	Enter the keyword backbone to redistribute matched routes
	to the OSPF backbone area (area 0.0.0.0).
level-1	Enter the keyword level-1to redistribute matched routes
	to IS-IS Level 1.
level-1-2	Enter the keyword level-1-2to redistribute matched
	routes to IS-IS Level 1 and Level 2.
level-2	Enter the keyword level-2to redistribute matched routes
	to IS-IS Level 2.
stub-area	Enter the keyword stub to redistributed matched routes to
	OSPF stub areas.
Not configured.
ROUTE-MAP

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Dell Networking OS Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000–ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

8.1.1.0Introduced on the E-Series ExaScale.

7.6.1.0Introduced on the S-Series.

7.5.1.0Introduced on the C-Series.

pre-6.1.1.0 Introduced on the E-Series.

262 Access Control Lists (ACL)