Dell 9.7(0.0) manual Cam-acl, Usage Information Related Commands VersionDescription

Usage Information

Related Commands

VersionDescription

8.3.12.0Introduced on the S4810.

8.3.11.1Introduced on the Z9000.

8.1.1.0Introduced on the E-Series ExaScale.

7.6.1.0Introduced on the S-Series.

7.5.1.0Introduced on the C-Series.

E-Series Original command

After entering the banner login command, type one or more spaces and a delineator character. Enter the banner text then the second delineator character. When the user is connected to the router, if a message of the day banner is configured, it displays first. If no message of the day banner is configured, the login banner and prompt appear. After the user has logged in, the banner EXEC (if configured) displays.

banner exec — enables the display of a text string when you enter EXEC mode.

banner login — sets a banner to display after successful login to the system.

cam-acl

Allocate content addressable memory (CAM) for IPv4 and IPv6 ACLs.

S6000

Syntaxcam-acl {default l2acl number ipv4acl number ipv6acl number ipv4qos number l2qos number l2pt number ipmacacl number [vman- qos vman-dual-qos] number ecfmacl number

Parameters	Use the default CAM profile settings and set the CAM as
default
	follows:
	• L3 ACL (ipv4acl): 4
	•	L2	ACL(l2acl): 6
	• IPv6 L3 ACL (ipv6acl): 0
	•	L3	QoS (ipv4qos): 2
	•	L2	QoS (l2qos): 1
	•	OpenFlow: 0 (disabled)
	• FCoE (fcoeacl): 0 (disabled)
	• iSCSI Optimization (iscsioptacl): 0 (disabled)

Control and Monitoring 93