Dell 9.7(0.0) manual Metric-style, Parameters Narrow, Transition, Wide

Command History

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.12.0Introduced on the S4810.

8.3.11.1Introduced on the Z9000.

7.8.1.0Added support for multi-topology ISIS.

6.3.1.0Introduced.

metric-style

To generate and accept old-style, new-style, or both styles of type, length, and values (TLV), configure a router.

Syntax	metric-style {narrow [transition] transition wide
	[transition]} [level-1 level-2]
	To return to the default values, use the no metric-style {narrow
	[transition] transition wide [transition]} [level-1
	level-2] command.
Parameters	narrow	Allows you to generate and accept old-style TLVs. The
		metric range is from 0 to 63.
	transition	Allows you to generate both old-style and new-style TLVs.
		The metric range is from 0 to 63.
	wide	Allows you to generate and accept only new-style TLVs. The
		metric range is from 0 to 16777215.
	level-1	Enables the metric style on Level 1.
	level-2	Enables the metric style on Level 2.
Defaults	narrow; if no Level is specified, Level-1 and Level-2 are configured.
Command	ROUTER ISIS
Modes

884 Intermediate System to Intermediate System (IS-IS)