Dell 9.7(0.0) manual Ipv6 ospf authentication null ipsec spi number MD5 SHA1, Parameters Null

VersionDescription

7.4.1.0Introduced on the E-Series and C-Series.

ipv6 ospf authentication

Configure an IPsec authentication policy for OSPFv3 packets on an IPv6 interface.

Syntax

ipv6 ospf authentication {null ipsec spi number {MD5 SHA1}

[key-encryption-type]key}}

Parameters

null

ipsec spi number

MD5 SHA1

key- encryption- type

key

Causes an authentication policy configured for the area to not be inherited on the interface.

Security Policy index (SPI) value that identifies an IPsec security policy. The range is from 256 to 4294967295.

Authentication type: Message Digest 5 (MD5) or Secure Hash Algorithm 1 (SHA-1).

(OPTIONAL) Specifies if the key is encrypted.

Valid values: 0 (key is not encrypted) or 7 (key is encrypted).

Text string used in authentication.

For MD5 authentication, the key must be 32 hex digits (non- encrypted) or 64 hex digits (encrypted).

For SHA-1 authentication, the key must be 40 hex digits (non-encrypted) or 80 hex digits (encrypted).

Defaults

Command Modes

Command History

Not configured.

INTERFACE

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.1.(0.0) Introduced on S4810 and Z9000.

8.4.2.0Introduced on the E-Series.

8.3.19.0Introduced on the S4820T.

Open Shortest Path First (OSPFv2 and OSPFv3) 1153