Dell 9.7(0.0) manual Defaults Command Modes History Medium

Defaults

Command

Modes

Command

History

medium Enter the keyword medium to set the DRP value as medium.

none

POLICY LIST CONFIGURATION

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Related

Commands

show config

Version	Description
9.7(0.0)	Introduced on the S6000-ON.
9.7(0.0)	Introduced on the S4810, S4820T, S5000, S6000, and
	Z9000 switches.

•ipv6 nd ra-guard enable — Allow you to configure the RA guard related commands.

•ipv6 nd raguard policy policy-name — Defines the router advertisement (RA) guard policy name and enter the RA guard policy configuration mode.

Display the RA guard policy mode configurations.

Syntax	show config
Command	POLICY LIST CONFIGURATION
Modes
Command	This guide is platform-specific. For command information about other platforms,
History	refer to the relevant Dell Networking OS Command Line Reference Guide.
	The following is a list of the Dell Networking OS version history for this command.
	Version	Description
	9.7(0.0)	Introduced on the S6000-ON.
	9.7(0.0)	Introduced on the S4810, S4820T, S5000, S6000, and
		Z9000 switches.
Example	Dell(conf)#ipv6 nd ra-guard policy test
	Dell(conf-ra_guard_policy_list)#show config
	!
	ipv6 nd ra-guard policy test
	device-role router
	hop-limit maximum 251
	mtu 1350
	other-config-flag on

reachable-time 540 retrans-timer 101 router-preference maximum medium

1034 Neighbor Discovery Protocol (NDP)