Command History

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0)

Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

7.6.1.0Introduced on the S-Series.

7.5.1.0Introduced on the C-Series.

6.1.1.0Introduced on the E-Series.

rmon hc-alarm

Set an alarm on any MIB object.

S6000

Syntax

rmon hc-alarm number variable interval {delta absolute}

 

rising-threshold value event-numberfalling-threshold value

 

event-number [owner string]

 

To disable the alarm, use the no rmon hc-alarmnumber command.

Parameters

number

Enter the alarm integer number from 1 to 65535. The value

 

 

 

must be unique in the RMON alarm table.

 

variable

The MIB object to monitor. The variable must be in the

 

 

SNMP OID format; for example, 1.3.6.1.2.1.1.3 The object

 

 

type must be a 64-bit integer.

 

interval

Time, in seconds, the alarm monitors the MIB variables; this

 

 

is the alarmSampleType in the RMON alarm table. The range

 

 

is from 5 to 3600 seconds.

 

delta

Enter the keyword delta to test the change between MIB

 

 

variables. This is the alarmSampleType in the RMON alarm

 

 

table.

 

absolute

Enter the keyword absolute to test each MIB variable

 

 

directly. This is the alarmSampleType in the RMON alarm

 

 

table.

1334

Remote Monitoring (RMON)

Page 1334
Image 1334
Dell 9.7(0.0) manual Rmon hc-alarm number variable interval delta absolute, Delta