Dell 9.7(0.0) manual Bgp client-to-client reflection, Reflection command

VersionDescription

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

8.3.1.0Introduced

Usage	Configuring this option retains the current best-path. When sessions are then reset,
Information	the oldest received path is chosen as the best-path.

bgp client-to-client reflection

Allows you to enable route reflection between clients in a cluster.

Syntax	bgp client-to-client reflection
	To disable client-to-client reflection, use the no bgp client-to-client
	reflection command.

Defaults

Command Modes

Command History

Usage Information

Related Commands

Enabled when a route reflector is configured.

ROUTER BGP

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000–ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

7.8.1.0Introduced on the S-Series.

7.7.1.0Introduced on the C-Series.

Route reflection to clients is not necessary if all client routers are fully meshed.

bgp cluster-id — assigns an ID to a BGP cluster with two or more route reflectors.

neighbor route-reflector-client — configures a route reflector and clients.

346 Border Gateway Protocol