Dell 9.7(0.0) manual Clear ip ospf statistics, Router-id

VersionDescription

8.3.7.0Introduced on the S4810.

7.8.1.0Added support for the Multi-Process OSPF.

7.6.1.0Introduced on the S-Series.

7.5.1.0Introduced on the C-Series.

pre- 6.1.1.1 Introduced on the E-Series.

clear ip ospf statistics

Clear the packet statistics in interfaces and neighbors.

S6000

Syntax	clear ip ospf [process-id] [vrf vrf-name] statistics [interface
	name {neighbor router-id}]
Parameters	process-id	Enter the OSPF Process ID to clear a specific process. If no
		Process ID is entered, all OSPF processes are cleared.
	vrf vrf-name	Enter the keyword vrf followed by the name of the VRF to
		clear all OSPF routing tables corresponding to that VRF.
	statistics	Enter the keyword statistics to clear the packet statistics in
		interfaces and neighbors.
	interface name	(OPTIONAL) Enter the keyword interface then one of the
		following interface keywords and slot/port or number
		information:
		• For Port Channel groups, enter the keywords port-
		channel then a number. For the C-Series and S-Series,
		the range is from 1 to 128.
		• For a SONET interface, enter the keyword sonet then the
		slot/ port information.
		• For a 10-Gigabit Ethernet interface, enter the keyword
		TenGigabitEthernet then the slot/port information.
		• For a 40-Gigabit Ethernet interface, enter the keyword
		fortyGigE then the slot/port information.
		• For a VLAN, enter the keyword vlan then a number from
		1 to 4094.
	neighbor	(OPTIONAL) Enter the keyword neighbor then the
	router-id	neighbor’s router-id in dotted decimal format (A.B.C.D.).
Defaults	none
Command	EXEC Privilege
Modes

Open Shortest Path First (OSPFv2 and OSPFv3) 1065