Dell 9.7(0.0) manual Vlan max-age, Max-age

Related Commands

VersionDescription

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

7.6.1.0Introduced on the S-Series.

7.5.1.0Introduced on the C-Series.

6.2.1.1Introduced.

vlan bridge-priority — sets the bridge-priority value.

vlan forward-delay — changes the time interval before Dell Networking OS transitions to the forwarding state.

vlan max-age — changes the time interval before PVST+ refreshes.

show spanning-tree pvst — displays the PVST+ configuration.

vlan max-age

To maintain configuration information before refreshing that information, set the time interval for the PVST+ bridge.

S6000

Syntax	vlan vlan-range max-ageseconds
	To return to the default, use the no vlan max-agecommand.
Parameters	vlan vlan-range	Enter the keyword vlan then the VLAN numbers. The range
		is from 1 to 4094.
	max-age	Enter the keywords max-agethen the time interval, in
	seconds	seconds, that Dell Networking OS waits before refreshing
		configuration information. The range is from 6 to 40
		seconds. The default is 20 seconds.
Defaults	20 seconds
Command	CONFIGURATION (conf-pvst)
Modes

Per-VLAN Spanning Tree Plus (PVST+) 1243