Dell 9.7(0.0) manual Longer-prefixes, First-Hop, Mac-Addr, VId

Command Modes

Command History

Usage Information

ip-address	(OPTIONAL) Enter the IP address of the network destination
mask	to view only information on that destination. Enter the IP
	address in dotted decimal format (A.B.C.D). Enter the mask in
	slash prefix format (/X).
longer-prefixes	(OPTIONAL) Enter the keywords longer-prefixesto view
	all routes with a common prefix.
summary	(OPTIONAL) Enter the keyword summary to view the total
	number of prefixes in the FIB.

•EXEC

•EXEC Privilege

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version	Description
9.7(0.0)	Introduced on the S6000-ON.
9.4(0.0)	Added support for VRF.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

7.7.1.0Added support for up to seven stack members.

7.6.1.0Introduced on the S-Series.

The following describes the show ip fib stack-unitcommand shown in the following example.

Field	Description
Destination	Lists the destination IP address.
Gateway	Displays either the word “direct” and an interface for a
	directly connected route or the remote IP address used to
	forward the traffic.
First-Hop	Displays the first hop IP address.
Mac-Addr	Displays the MAC address.
Port	Displays the egress-port information.
VId	Displays the VLAN ID. If no VLAN is assigned, zero (0) is
	listed.

IPv4 Routing 795