Dell 9.7(0.0) manual Advertise med video-signaling

Related Commands

VersionDescription

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

7.7.1.0Introduced on the S-Series.

7.6.1.0Introduced on the C-Series and E-Series.

debug lldp interface — debugs LLDP.

show lldp neighbors — displays the LLDP neighbors.

advertise med video-signaling

To advertise video control packets that use a separate network policy than video data, configure the system.

S6000

Syntaxadvertise med video-signaling {vlan-id layer2_priority

DSCP_value} {priority-tagged number}

To return to the default, use the no advertise med video-signaling

{vlan-id layer2_priority DSCP_value} {priority-taggednumber} command.

Parameters

Defaults

Command Modes

Command History

vlan-id	Enter the VLAN ID. The range is from 1 to 4094.
layer2_priority	Enter the Layer 2 priority (C-Series and E-Series only). The
	range is from 0 to 7.
DSCP_value	Enter the DSCP value (C-Series and E-Series only). The range
	is from 0 to 63.
priority-tagged	Enter the keywords priority-taggedthen the Layer 2
number	priority. The range is from 0 to 7.

unconfigured.

CONFIGURATION (conf-lldp)

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

972 Link Layer Discovery Protocol (LLDP)