Usage Information

VersionDescription

E-Series legacy command

On the C-Series and S-Series, unregistered multicast data traffic drops when you disable flooding; they do not forward the packets to multicast router ports. On the C-Series and S-Series, in order to disable Layer 2 multicast flooding, disable Layer 3 multicast (no ip multicast-routing).

ip igmp snooping last-member-query-interval

The last member query interval is the maximum response time inserted into Group-Specific queries sent in response to Group-Leave messages.

S6000

Syntaxip igmp snooping last-member-query-interval milliseconds

Parameters

Defaults

Command Modes

Command History

To return to the default value, use the no ip igmp snooping last-member-query-intervalcommand.

milliseconds

Enter the interval in milliseconds. The range is from 100 to

 

65535. The default is 1000 milliseconds.

1000 milliseconds

 

INTERFACE VLAN

 

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version

Description

9.7(0.0)

Introduced on the S6000-ON.

9.5(0.0)

Introduced on the Z9500.

9.2(0.0)

Introduced on the M I/O Aggregator. This command is

 

supported in Programmable-Mux (PMUX) mode only.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

7.6.1.0Introduced on the S-Series.

658

Internet Group Management Protocol (IGMP)

Page 658
Image 658
Dell 9.7(0.0) Ip igmp snooping last-member-query-interval, Usage Information VersionDescription Series legacy command