Dell 9.7(0.0) - page 1305

To return the default metric to the original values, use the no default-metric
command.
Parameters number Specify a number. The range is from 1 to 16. The default is 1.
Defaults 1
Command
Modes
ROUTER RIP
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.6.1.0 Introduced on the C-Series.
pre- 6.2.1.1 Introduced on the E-Series.
Usage
Information
This command ensures that route information being redistributed is converted to
the same metric value.
Related
Commands
redistribute — allows you to redistribute routes learned by other methods.
description
Enter a description of the RIP routing protocol.
S6000
Syntax description {description}
To remove the description, use the no description {description}
command.
Parameters description Enter a description to identify the RIP protocol (80
characters maximum).
Routing Information Protocol (RIP) 1305