Command History

Usage Information

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0)

Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.12.0Introduced on the S4810.

8.3.11.1Introduced on the Z9000.

7.8.1.0Added IPv6 ISIS support.

6.3.1.0Introduced.

When you execute this command, IS-IS does not download the route to the routing table if the same route was redistributed into IS-IS routing protocol on the same router.

domain-password

Set the authentication password for a routing domain.

Syntax

Parameters

Defaults

Command Modes

Command History

domain-password [hmac-md5 encryption-type] password

To disable the password, use the no domain-passwordcommand.

hmac-md5

(OPTIONAL) Enter the keywords hmac-md5to encrypt the

 

password using MD5.

encryption-

(OPTIONAL) Enter 7 to encrypt the password using DES.

type

 

password

Enter an alphanumeric string up to 16 characters long. If you

 

do not specify an encryption type or hmac-md5

 

keywords, the password is processed as plain text which

 

provides limited security.

No default password.

ROUTER ISIS

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Intermediate System to Intermediate System (IS-IS)

857

Page 857
Image 857
Dell 9.7(0.0) manual Domain-password hmac-md5 encryption-type password, Do not specify an encryption type or hmac-md5