hardware watchdog stack-unit 5
!
Related
Commands
ssh-peer-stack-unit
Open an SSH connection to the peer stack-unit.
Syntax ssh-peer-stack-unit [-l username]
Parameters -l username (OPTIONAL) Enter the keyword -l then your user name. The
default is the user name associated with the terminal.
Defaults Not configured.
Command
Modes • EXEC
• EXEC Privilege
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.3.11.1 Introduced on the S-Series.
telnet
Connect through Telnet to a server. The Telnet client and server in Dell Networking support IPv4 and
IPv6 connections. You can establish a Telnet session directly to the router or a connection can be
initiated from the router.
NOTE: The Telnet server and client are VRF-aware. Using the vrf parameter in this command, you
can make a Telnet server or client to listen to a specific VRF. This capability enables a Telent server
or client to look up the correct routing table and establish a connection.
Control and Monitoring 151