Dell 9.7(0.0) Debugging and Diagnostics, Diagnostics and Monitoring Commands, Stack-unit Number

13

Debugging and Diagnostics

The basic debugging and diagnostic commands are supported by the Dell Networking Operating System. This chapter contains the following sections:

•Diagnostic and Monitoring Commands

•Offline Diagnostic Commands

•Hardware Commands

Diagnostics and Monitoring Commands

The following section describes the diagnostics and monitoring commands.

For similar commands, refer to the Control and Monitoring chapter.

logging coredump stack-unit

Enable coredump on a stack.

Syntaxlogging coredump stack-unit {stack-unit-number all}

Parameters
stack-unit	Enter the stack-unit id.
stack-unit-
number	For S6000 the range is from 0 to 5.
all	Enable coredump on all stack-unit.

Defaults

Command Modes

Command History

Enabled by default on customer builds.

CONFIGURATION

VersionDescription

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

522 Debugging and Diagnostics