Dell 9.7(0.0) manual Hold-time seconds centisecs centisecs

hold-time

Specify a delay (in seconds) before a switch becomes the MASTER virtual router. By delaying the initialization of the VRRP MASTER, the new switch can stabilize its routing tables.

Syntax	hold-time {seconds centisecs centisecs}
	To return to the default value, use the no hold-timecommand.
Parameters	seconds	Enter the number of seconds. The range is from 0 to 65535.
		The default is zero (0) seconds.
	centisecs	Enter the keyword centisecs then the number of centisecs
	centisecs	in units of 25 centisecs . The range is from 0 to 65525 in
		units of 25 centisecs.
Defaults	zero (0) seconds or or (0) centiseconds
Command	VRRP
Modes
Command	This guide is platform-specific. For command information about other platforms,
History	refer to the relevant Dell Networking OS Command Line Reference Guide.
	The following is a list of the Dell Networking OS version history for this command.
	Version	Description
	9.7(0.0)	Introduced on the S6000-ON.
	9.5(0.0)	Added support for centisecs on the Z9000, S6000, S4820T,
		S4810, and MXL.
	9.2(1.0)	Introduced on the Z9500.
	9.0.2.0	Introduced on the S6000.
	8.3.19.0	Introduced on the S4820T.
	8.3.11.1	Introduced on the Z9000.
	8.3.7.0	Introduced on the S4810.
	7.6.1.0	Introduced on the S-Series.
	7.5.1.0	Introduced on the C-Series.
	6.2.1.1	Introduced on the E-Series.
Usage	If a switch is a MASTER and you change the hold timer, disable and re-enable VRRP
Information	for the new hold timer value to take effect.
Related	disable — disables a VRRP group.
Commands

1666 Virtual Router Redundancy Protocol (VRRP)