Dell 9.7(0.0) manual Interface range macro name, Enter the name of an existing macro

Example (Single Range)

Related

Commands

Version	Description
9.7(0.0)	Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

8.5.1.0Added support for 4-port 40G line cards on ExaScale.

8.2.1.0Added support for 4093 VLANs on E-Series ExaScale. Prior releases supported 2094.

8.1.1.0Introduced on the E-Series ExaScale.

7.6.1.0Introduced on the S-Series.

7.5.1.0Introduced on the C-Series.

pre-Version	Introduced on the E-Series.
6.1.1.0

This example shows how to define an interface range macro named test. Execute the show running-configcommand to display the macro definition.

Dell(config)# define interface-range test tengigabitethernet 1/1 -3,

tengigabitethernet 5/1 -47, tengigabitethernet 13/1 -89

Dell# show running-config grep define

define interface-range test tengigabitethernet 1/1 -3, tengigabitethernet 5/1 -47,

tengigabitethernet 13/1 - 89 Dell(config)#interface range macro test Dell(config-if-range-te-1/1-3,te-5/1-47,te-13/1-89)#

interface range – configures a range of command (bulk configuration)

interface range macro name – runs an interface range macro.

interface range macro name

Run the interface-range macro to automatically configure the pre-defined range of interfaces.

S6000

Syntax	interface range macro name
Parameters	name	Enter the name of an existing macro.
Defaults	none

684 Interfaces