Command History

Usage Information

Related Commands

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0)

Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.12.0Introduced on the S4810.

8.3.11.1Introduced on the Z9000.

7.5.1.0Added IPv6 ISIS support.

6.3.1.0Introduced.

When you use this command to redistribute routes into a routing domain, the router becomes an autonomous system (AS) boundary router. An AS boundary router does not always generate a default route into a routing domain. The router still requires its own default route before it can generate one.

How a metric value assigned to a default route advertises depends on the metric- style command configuration. If the metric-stylecommand is set for Narrow mode and the metric value in the default-information originate command is set to a number higher than 63, the metric value advertised in the LSPs is 63. If the metric-stylecommand is set for Wide mode, the metric value in the default-information originate command is advertised.

•redistribute — redistributes routes from one routing domain to another routing domain.

•isis metric — configures a metric for an interface.

•metric-style — sets the metric style for the router.

•show isis database — displays the IS-IS link state database.

description

Enter a description of the IS-IS routing protocol.

Syntax

description {description}

 

To remove the description, use the no description {description}

 

command.

852

Intermediate System to Intermediate System (IS-IS)

Page 852
Image 852
Dell 9.7(0.0) manual Enter a description of the IS-IS routing protocol