Dell 9.7(0.0) manual Ip ssh source-interface, Dellconf#ip ssh server vrf vrf1

following command to restart the SSH server on the default VRF: ip ssh server vrf.

Example	•	Dell(conf)#ip ssh server vrf vrf1
	•	Dell(conf)#no ip ssh server vrf
	•	Dell(conf)#ip ssh server vrf management
	•	Dell(conf)#no ip ssh server vrf
Related	show ip ssh — displays the ssh information.
Commands

ip ssh source-interface

Specifies an interface’s IP address as the source IP address for an outgoing SSH connections.

Syntax	ip ssh source-interface interface
	To delete a source interface, use the no ip ssh source-interfacecommand.
Parameters	interface	Enter the following keywords and slot/port or number

information:

Defaults

Command Modes

Command History

•For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the slot/port information.

•For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/port information.

•For a Loopback interface, enter the keyword loopback then a number from 0 to 16383.

•For a port channel interface, enter the keywords port- channel then a number. The range is from 1 to 128.

•For a Null interface, enter the keyword null then the Null interface number.

•For a VLAN interface, enter the keyword vlan then a number from 1 to 4094.

Not configured.

CONFIGURATION

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version	Description
9.7(0.0)	Introduced on the S6000-ON.
9.5(0.0)	Introduced on the Z9500.
9.4(0.0)	Introduced on the S-Series and Z9000.

1436 Security